Name: The symbolic name of the S7 connection. Network type: Select Ethernet as the Network type for the Industrial Ethernet (ISO) communications. For documentation purposes, it is suggested that the name match the assigned PC name, however, this is not required for communications. When creating the COML S7 files, enter the following information into the fields. txt file as shown in Figure 2.į IGURE 2: T HE SIMATIC NET COML S7 - ISO.TXT DIALOG BOXĢ. Go into the COML S7 program and create a. The following step-by-step procedure illustrates how the. ldb files necessary for the Simatic Net to interface the Siemens CP1613 card to the CP443-1 module on the S7-400 UR. Note: If you do not have the most current version of the driver installed, contact your Siemens distributor or Siemens Technical Support to obtain the latest Siemens Simatic Net CD.Ĭreating a Database Using COML S7 (v2.12) The COML S7 program creates the. For this Tech Note’s example, the latest version of the driver available, v2.1, is used (Figure 1).į IGURE 1: T HE A DD/REMOVE PROGRAMS PROPERTIES DIALOG BOX It is highly recommended that the most current version available from Siemens is obtained and installed. When the Add/Remove Programs Properties dialog box appears, verify if the driver is installed, and what version of this driver is installed on your system. Go to the Control Panel and select Add/Remove. Obtain and install the Siemens Simatic Net S7-1613 driver from the Siemens Simatic Net CD. Installing the Siemens Simatic Net S7-1613 v2.1 Driver In order to communicate through the Siemens CP1613 card, it is necessary to install the Siemens Simatic Net S7-1613 driver. Section 1 - Configuring the Siemens Simatic Net Software This section describes how the Siemens Simatic Net software is configured. Note: This Tech Note uses examples from Siemens Simatic Net S7-1613 v2.1. This document is broken down into two basic sections: Section 1 - Configuring the Siemens Simatic Net software Section 2 - Configuring the WW S7 I/O Server Throughout this document, it is assumed that you have a basic working knowledge and understanding of the Siemens Simatic Net and Wonderware FactorySuite™ I/O Server software. This document describes the necessary steps for establishing Industrial Ethernet (ISO) communications for Windows NT 4.0, via the Wonderware® S7 I/O Server™ to an S7-400 PLC, through a Siemens CP1613 card in the PC. See the Terms of Use for more information. Configuring the S7 Server for Windows NT 4.0 to Access S7-400 PLCs via the Siemens CP1613 Card for ISO (Industrial Ethernet)Ĭonfiguring the S7 Server for Windows NT 4.0 to Access S7400 PLCs via the Siemens CP1613 Card for ISO (Industrial Ethernet) All Tech Notes and KBC D documents and software are provided 'as is' without warranty of any kind.

Windows nt4 server iso